Taking your car for a wash is the best way to keep it clean from all sorts of dirt and debris. Cars are exposed to all kind of things since they travel for long distances. And the simple fact that they are always outside means they can harbor both dirt and microorganism. Taking too long to clean up your car could not just lead to accumulation of dirt, but also pests.

In addition to pests and dirt build up, food particles that drop in the interior of the car can stain up the chairs, leaving behind permanent dirt marks on the seats and other car interior parts. A foul smell may also develop when the car takes a long time without being cleaned. Frequent washes are advised to keep dirt, oils, mud off the car.

Before taking on any автомойка таллинн whether at home or at washing bay, special precautions should be taken to ensure everything is in check. Here are a few checks to be done before initiating the wash.

Close engine cabinet

Ensure that the car bonnet is closed before splashing water and other detergents on the car. If a lot of water flows into the car’s electric system, it damages the engine and that can cost you replacement of the entire engine. The person in charge of washing the car should ensure that the bonnet is closed before work proceeds.

Engine turned off

This sounds like a joke but it can happen. Always check if the engine is shut down before proceeding with the wash. It can be very hazardous if water accesses an ignited engine. Intrusion of water into the engine leads to total damage and more likely accidents. This should be totally avoided.

Windows Pulled up

Imagine using jet car wash mode when your car windows are open. This can be very painful for the interior of the car especially on the seats that take very long to dry up. The dashboard which has a very delicate electric system could be affected and cause short circuit leading to damage. In this case, the dashboard is replaced. Special precaution should be taken to ensure the windows are well pulled before the activity starts.

Check Tools

Check the availability of all the cleaning tools and their working conditions. This includes the hose pipe, vacuum cleaner, blowers, dryers, towels among other items. The person cleaning the car should ensure that all items needed are in one place to save the time for doing the activity.

Weather

This should be the first thing to check before processing with the car wash. A sunny day is more appropriate for a car wash because it will take a shorter time for the interior to dry than on non-sunny day. The heat generated from the sun allows the car parts to quickly and efficiently dry up.

If all the above are checked okay, the person in charge of cleaning the car should go ahead and give the car a nice wash.

engine tuning

In modern metropolitan areas to find a parking space is becoming increasingly difficult, and to park cars in a limited space is even more difficult. It is good when you have a friend with you who will help you safely put the car in and not hit any expensive foreign car. An alternative solution – electronic parking assistance system, or parking sensors.

What it is and how it works

Parktronic is a system of sensors that help drivers maneuver in a confined space. Studying the device PDC can distinguish the following elements:

Sensors (from two to ten) – “scan” the space in front of the bumpers and form a signal;

electronic control unit – the brain of the system, which, on the basis of the signal from the sensors, provides information about the absence or presence of an obstacle and the distance to it;

warning system (light, less often sound) – is installed in the cabin and informs the driver about the distance to the obstacle in the form of a graphic scale or frequency of sounds made.

LED indicators can be in two variations of execution – in the form of a scale with several divisions or in the form of a digital display indicating the distance to the object.

The optimal number of sensors

The effectiveness of PDC depends on the number of sensors. Most low-end systems are equipped with 2-3 sensors, but these parktronics are already considered obsolete. This amount is not enough to close all blind spots. The optimal solution is considered to be 2-4 scheme (two sensors in the front and four in the rear bumper). Such an arrangement is characterized by ease of use and sufficient information. With such a PDC parking process is greatly facilitated, even in clogged streets and playgrounds.

In luxury cars, systems with 8 or even 10 sensors are installed. They allow you to detect almost any obstacles, even quite small ones. However, too high sensitivity PDC can be a problem, since the system will react even to minor obstacles and mislead the driver. As a rule, such models have a shutdown function, so as not to be confused while driving on the road.

How to choose parking sensors

Making the choice of parking sensors you need to focus not only on the cost of the device, but also on the key parameters. These include the type and number of sensors used, their sensitivity, types of alerts and ease of use. Please note that some systems require qualified installation specialists, others can be installed independently in your garage.

In general, parking sensors are very convenient thing, especially for inexperienced drivers. This assistant will be useful for owners of large SUVs and minivans. In urban environments, parking such cars is quite difficult, even with many years of experience. Parktronic will avoid accidents and damage to the body.